Cabinet Ageing Ovens

Elastocon's cabinet ovens meet most ISO and ASTM standards for testing rubber and plastic materials. Depending on model, the ovens can be supplied with low air speed, high laminar or turbulent air speed, or with a carousel.

The EB 04-II cabinet oven has low air speed and a flow meter that can be set between 3 to 20 changes per hour, which meets the requirements in ISO 188 method A.

Cabinet Oven, EB 10-II

Cabinet Oven EB 10-II has low air speed and a factory set throttle to give a fixed air exchange rate of 7 or 14 changes/hour, which meets the requirements in ISO 188 method A.

Cabinet Oven, EB 12-II

The EB 12-II cabinet oven has high air speed with laminar flow from bottom to top, and a factory set throttle to give a fixed air exchange rate of 7 or 14 changes per hour, which meets the requirements in ISO 188 method B.

Cabinet Oven, EB 26

The EB 26 ageing cabinet has high air speed and a fixed air exchange rate of 7 or 14 changes per hour, which meets the requirements in ISO 188 method B. This oven also has a carousel for simple and fast mounting of the samples. The carousel – which rotates during ageing – has room for up to 36 samples.

Cabinet Oven, EB 27

The EB 27 cabinet oven has 2 flow meters to cover the exchange rates between 3 to 200 changes per hour, but still with low air speed inside the chamber. This cabinet oven meets the requirements in ISO 188 method A, IEC 60811-1-2, IEC 60216-4-1, ASTM D5423 type 1 and 2, ASTM D573 and ASTM E145 type IIA.